- Authorized emission measurements
- Technological measurements
- Inspection activities on automatic emission measurement systems (AMS-E)
- Emission Analyzer Calibrations
- Guaranteed measurements
- Thermal measurements
- Overview of measured pollutants
- Efficiency control of the II. stage of gasoline vapor recovery
- Measuring acid dew point in flue gases and waste gases
Thermal measurements
The company provides services in the field of thermal diagnostics with the following objectives:
- determining the efficiency and thermal efficiency of energy and thermal equipment, optimizing the operation of thermal aggregates
- analyzing the work of technological aggregates with the aim of minimizing heat losses and solving technological problems in thermal processing, firing, drying, etc.
- assessment of thermal properties of buildings and economical use of thermal energy, including its production and distribution
For illustration, we present some cases of problems solved by us:
- increasing the thermal efficiency of boilers – based on the results of thermal efficiency, natural gas-fired boilers were cleaned from the flue gas side, repairs were made to the lining and control parts (flue gas damper), which resulted in an increase in thermal efficiency of approximately 2.5%
- optimizing the fuel-air combustion ratio in the melting unit
- optimizing the combustion ratio and combustion conditions in wood waste boilers
- solving the impact of secondary air on the formation of CO emissions and the results of the heat balance of the operation of a boiler with a movable return grate burning brown coal
- optimizing the operating mode when burning waste, rubber and plastics in order to minimize the formation of carbon monoxide emissions
- minimizing the formation of CO emissions using waste heat in cupola furnaces
- monitoring the operational and technological impacts on the formation CO and NOx emissions during electric firing of ceramic shards
- optimization of the combustion process during the incineration of hospital waste in older types of incinerators
- technical assistance in solving the problem of incineration of vegetable waste in a boiler with a cyclone hearth (suspension combustion)
- identification of the causes of uneven operation of an 8-pan glass furnace
- optimization of the use of sorbent in the desulfurization process
- possibilities and technical solutions for denitrification with gaseous ammonia
From the above brief overview, it is clear that the solution to the problem is carried out in a comprehensive manner, taking into account the minimization of emissions and fuel costs, the use of waste heat and the optimization of the operation of the aggregate with the provision of maximum product quality.